Laser Labs Tint Meter, 2-Piece - Inspector Ii

Laser Labs Tint Meter, 2-Piece - Inspector Ii


In stock
Please select an option.

This model meets the New York Inspection Station Requirement.

Introducing the newer, smaller Inspector II Tint Meter from Laser Labs. The Inspector II Tint Meter has a two-piece design that allows you to sandwich the glass you are testing. It can measure material as thin as a sheet of window film up to ½ inch thick glass. A magnet alignment mechanism and auto-calibration promote consistently accurate readings. For hard to reach areas, suction cups adhere the light source to the inside of the window. The Inspector II Tint Meter performs as accurately in the day as it does at night. Each meter is equipped with two (2) N.I.S.T. traceable reference samples to verify its accuracy. The Inspector II Tint Meter is designed for the most demanding police use.


  • Wavelength: 550 nanometers
  • Bandwidth: 50 nanometers
  • Accuracy: ±2 percentage point
  • Repeatability: 1 percentage point
  • Measurement Range: 0% to 100%
  • Temperature Range: 0 to 110 degrees F
  • Humidity Range: 0% to 100% Non-condensing
  • Sample Thickness: up to .25" (6.35 mm)
  • Sample Size: 1" x 3" (25 x 75 mm) minimum
  • Testing Time: 4 seconds
  • Effect of Stray Light: not affected
  • Lamp Life: 10 years
  • Power Source: 2 lithium battery size CR2032 (3V) (included)
  • Weight: 3.2 oz. (90 grams)
  • Dimensions: 3.75" x 1.75" x 1.25" (95 x 45 x 30 mm)